Premium 16/2 0-10V LED Dimmer Control Cable

16 AWG, 2 Conductors, Solid, Unshielded
Plenum Rated – CMP, CL3P, FT6

High quality, low voltage 0-10V dimming cable for long lasting low voltage LED ballast wiring and connections

Our high quality low voltage dimming cables or lamp cables or LED lighting cables have a special color code (pink/purple) that makes it very easy to set up long term low voltage LED ballast wiring and connections

Part number: 8003

Description

Syston · 0–10V LED dimming

16/2 CMP
Dimmer Control Cable

SYSTON PART 8003

Two 16 AWG solid bare-copper conductors for specified 0–10V LED dimming controls. Plenum PVC construction, Pink / Violet identification and CMP / CL3P / FT6 ratings.

  • 16 AWG · 2 conductors
  • Solid copper · Unshielded
  • CMP / CL3P / FT6
Syston Part 8003 16 AWG two-conductor solid copper LED dimmer control cable

Part 8003 · 16 AWG, 2 conductors
White jacket; Pink / Violet conductors. Confirm the required ordering configuration.

Construction, clearly stated

The details that
help you specify.

Confirm the circuit, conductor count, cable rating and equipment requirements before selecting a cable for your project.

01 / CONDUCTORS

Solid bare copper.

Two twisted 16 AWG conductors. Pink and Violet identification supports the published LED dimming application.

02 / CABLE RATINGS

CMP / CL3P / FT6.

Published plenum ratings for Part 8003. Match the required cable markings to the project pathway.

03 / CONSTRUCTION

Plenum PVC. Inside and out.

Plenum PVC insulation and jacket, with a lengthwise ripcord underneath the jacket for cable preparation.

Product specifications

Know what
you are ordering.

Published construction, ratings and ordering information for Syston Part 8003.

View the technical data sheet ↗

0–10V describes the intended dimming-control application. Confirm the connected equipment and pathway requirements; a cable voltage rating alone does not establish application compatibility.
Part 8003 · Published product parameters
Part number 8003
Conductor size / count 16 AWG / 2 conductors
Conductor Solid annealed bare copper; twisted
Shielding Unshielded
Conductor identification Pink / Violet
Cable ratings CMP / CL3P / FT6
Insulation Plenum PVC
Jacket Plenum PVC; White
Published cable voltage rating 300 V
Nominal cable diameter 0.177 in
Installation temperature +32°F to +140°F
Storage & operation −4°F to +167°F
Listed lengths 50 / 100 / 250 / 500 / 1,000 ft
Ripcord Lengthwise under the jacket

Nominal dimensions are not guaranteed maximum dimensions. Confirm current documentation before final specification.

Published standards references
The existing product page references UL 13, UL 444, NFPA 262, CSA C22.2 No. 2556 (FT6), ASTM B-3 / B-8 and RoHS 3 (EU 2015/863). Request current model-specific compliance documentation for your project. Manufacturing management-system certifications are separate from product certification.

Ordering options

White jacket.
Five listed lengths.

White outer jacket

Listed lengths: 50, 100, 250, 500 and 1,000 ft. Confirm packaging format, complete ordering SKU, pricing and lead time with Syston.

Custom constructions, lengths, colors and packaging may be requested. A listed option is not a stock or delivery commitment.

Typical applications

Specified 0–10V dimming controls.

  • Low-voltage LED dimmer control wiring.
  • Compatible ballast control wiring and connections.
  • Specified two-conductor, power-limited control circuits.

Confirm the equipment documentation, circuit classification, required conductor count and pathway. Do not infer universal compatibility from the product name.

Syston supplies wire and cable products. Consult a qualified electrician or engineer for system design, code applicability and installation questions.

Product questions

Answers before
you order.

Construction, identification and ordering information for this model. These answers are product information, not project design or installation approval.

What does 16/2 mean for Part 8003?
Part 8003 contains two 16 AWG solid annealed bare-copper conductors. The published product record describes the conductors as twisted and unshielded, with Pink and Violet identification.Reference: Part 8003 published specifications · Technical data sheet
What insulation and jacket does 8003 use?
Both the insulation and the jacket are specified as Plenum PVC. The published description identifies the compound as low smoke, flame retardant and RoHS compliant. The outer jacket color listed for this model is White.Reference: Part 8003 published specifications · Technical data sheet
What are the published cable ratings?
The product is identified as CMP / CL3P / FT6, with a published 300 V cable rating. The intended control application is 0–10V LED dimming; the cable rating is not a statement of the connected control signal voltage. Confirm the current specification sheet and project requirements.Reference: Part 8003 published specifications · Technical data sheet
Which conductor colors are used?
The two conductors are Pink and Violet, described on the official product page as matching the ballast leads. Confirm the connected equipment’s identification and documentation. The conductor colors are separate from the White outer jacket.Reference: Part 8003 published specifications · Technical data sheet
Which lengths and packaging options are listed?
The official product page lists 50, 100, 250, 500 and 1,000 ft lengths and a White jacket. Confirm the available length, packaging format, complete ordering SKU, price and lead time with Syston. Custom constructions, lengths, colors and packaging may be requested.Reference: Part 8003 published specifications · Technical data sheet
Is this a thermostat cable or a universal control cable?
8003 is presented as a 16/2 0–10V LED dimmer control cable. Selection must follow the specific equipment, circuit, conductor count and pathway requirements. Use the specifications for the exact model being ordered.Reference: Part 8003 published specifications · Technical data sheet
Does the outdoor attribute confirm direct-burial or wet-location use?
The current website lists Above Ground as an outdoor attribute. That attribute alone does not establish suitability for wet locations, underground use or direct burial. Ask for the model-specific documentation and have the intended route reviewed by a qualified electrician or engineer.Reference: Part 8003 published specifications · Technical data sheet
Where can I get specifications or request a quote?
Use the Part 8003 technical data sheet link in Downloads, or contact Syston with the part number, jacket color, required length, quantity, delivery location and timing. Pricing and availability require confirmation; the project tools on this page prepare an inquiry only.Reference: Part 8003 published specifications · Technical data sheet

Project tools · Part 8003

Check. Prepare. Find answers.

Review stated conditions, prepare an inquiry and look up documented product answers. These tools operate on this product’s published information.

Initial product check

Evaluate Part 8003

Compare your stated requirements with this model. This is a preliminary check, not engineering approval or a full-catalog recommendation.

Inquiry preparation

Build Preliminary Line Item

Estimate total cable length and a package quantity using a listed length. Syston must confirm the ordering SKU, package, availability and price.

Documented product answers

Find Approved Answer

Search the product answers above. This is a document lookup, not an AI assistant or engineering review. Questions without a supported answer go to product support.

Product & project support

Request Technical
and Project Support

Need product documentation or help identifying the information for your project? Share the part number, equipment requirements and application with our team.

Contact Product Support

For system design, code applicability and installation, consult a qualified electrician or engineer.

Purchasing & sales

Syston Sales

Request product pricing, samples and ordering details, or find a purchasing channel.

Documents & product information

Syston Resources

Access technical documentation and supporting product information.

Channel partnerships

Become a Distributor

Build a connection with Syston for your wire and cable business. Tell us about your company, markets and product interests to start a distributor conversation.

Explore Distributor Partnership

Spread the love

Additional information

Gauge

16 AWG

Indoor

Plenum

Outdoor

Above Ground

Conductor Count

2 Conductor

Conductor Material

Solid Copper

Cable Strengths

Our premium 16/2 solid LED Dimmer Control Cable has many strengths:

  • 16 AWG (or 16 gauge) which makes this heavy-gauge wire that has less impact on quality over longer distances
  • Low voltage 0-10V ballast wiring and connection
  • Special color code matching the ballast leads (Pink/ Violet)
  • Solid annealed bare copper conductors, twisted
  • Flexible and easy to strip, so you or your customers can easily install it, even around tight corners
  • RhinoPac® packaging solution, designed to provide smooth pulling during installation while providing reliable protection against crushing and water damage during transport or storage
  • A ripcord underneath the jacket, to make it easy to remove during installation
  • Legend markings for channels, rooms, and zones so installation is faster and easier
  • Ascending and descending E-Z footage markings, so there’s no need for a measuring tape during installation
  • CL3P (Plenum-Rated) Flame-retardant jacket, for peace of mind in case of fire
  • RoHS compliant, so you can rest easy knowing it doesn’t contain hazardous substances that could harm you, your employees, or your customers (more information about this is in our Green Leaf Label)
  • Third-party verified for guaranteed performance, so it will stand up to your needs or those of your customers
  • Operates in a wide range of temperatures, so it can be installed in any area in any part of North America
  • This cable has a thick insulation and is rated to 300-Volt and is classified as a Class-3 (CL3) Power-Limited Circuit Cable. (CL3 cables can carry a surge of up to 300 watts, while CL2 can only carry a surge of up to 150 watts. A CL3-rated cable can take the place of any CL2, however, a CL2 cannot take the place of a CL3)
  • Versatile applications including low voltage 0-10V ballast wiring and connection, addressable fire systems, data circuits, monitor/detection, control circuits, initiating circuits, notification circuits, class 2 and class 3 DC power, commercial audio, luminaire, dimming, security and general-purpose power limited circuit cable for low voltage cable applications

Standards Compliances

Our premium 16/2 solid LED Dimmer Control Cable complies with the following national and international standards:

  • NEC: 725 & 800
  • UL Standard: UL 13 & UL 444
  • Flame Rating: NFPA 262 (Plenum); CSA C22.2 No.2556 (FT6)
  • ASTM B-3 & B-8
  • RoHS 3 (EU 2015/863)
  • ISO 9001: 2015
  • ISO 14001: 2015
  • OHSAS 18001

Resources

RoHS III Certificate of Compliance

Specifications

8003.pdf

Become A Distributor

Syston Cable Technology believes in identifying, building and nurturing long term distributor partnerships. We seek well run, established and properly resourced distributor partners that want to grow their business as much as we want to grow ours. Our partnerships begins with our portfolio of high performance cable products with the most competitive price and our well known brands, and continue with an array of support materials and programs to insure our distributor partners are successful in their respective marketplaces.

If you or your company is up for the challenge, and the rewards that come with being a distributor partner, please take a few minutes to complete the application form below and click the SUBMIT button at the bottom. Upon review, we will contact you to complete the application process. All applications are reviewed within 48 hours. 

SYSTON Sales

SYSTON Resources

Translate »